Coconut soap tends to have quite a huge number of applications. It’s great for various beauty projects, from lip balm to cold-process soap. Cold-process soap is something that is widely used in almost every recipe.
While coconut oil is very hydrating when applied directly to the skin, it also gives cold-process soap more cleansing qualities when combined with sodium hydroxide. If it makes up more than about 33% of the total recipe, the bars may feel too drying and cleansing. Some soaping guidelines, however, are meant to be broken! You can easily make soap using only coconut oil if you have an unusually high super fat level.
Making a Coconut Soap At Home
It’s a lot of fun and exciting to make cold-process soap. A cold-process soap recipe is made entirely out of coconut oil. This process produces unscented, hard, white, fluffy-lathering bars that gently cleanse your skin. Batch size: 16 oz (454 g) contains a 30.5% lye solution and 20% super fat.
- Electronic Kitchen Scale
- digital thermometer and infrared thermometer
- Solid oils are melted in a stainless-steel pan.
- A sizable bowl for pouring liquid oils into a heat-resistant jug for the lye solution.
- A rubber spatula to stir and scrape.
- silicone square mold
- Goggles (eye protection) (eye protection)
- Solution of lye
2.35 oz sodium hydroxide 66 g
5.29 oz 150 g distilled water
- Solid oils
454 g solid oils Coconut oil (refined) 16 oz
Preparation for Making Soap
Ensure you have all the tools, supplies, and equipment you need at your soapmaking station. Utilize a digital scale to measure the ingredients in advance. When calculating the lye, be sure to use gloves.
Construct the Lye Solution
Before you attempt to make coconut oil soap for the first time, it is extensively crucial to read about it. Set yourself up in a space with good ventilation, wear your rubber gloves, and put on your eye protection (goggles). Perfect locations include outside, on a porch, or beneath a stove. Using a stainless-steel spoon, pour the sodium hydroxide into the water and stir. Don’t breathe the fumes in, please. Stir thoroughly and cool to 100°F (38°C) in a secure location. I usually place the jug of lye solution in the sink submerged in cold water.
Warm Up the Coconut Oil
Heat the coconut oil in a stainless-steel pan over low heat until it just starts to liquefy. Coconut oil will melt faster than you expect because of its low melting point of only 76°F/24°C. Resist the urge to increase the temperature. Remove the pan from the heat once the chocolate has completely melted, then let it cool on a potholder. Stir frequently and allow to cool to 100°F (38°C). Although an essential oil or fragrance isn’t specified in the recipe, it could be added now to the melted coconut oil.
Make Soap with Coconut Oil
- Prepare the soap mold and always make sure that your gloves and goggles are on, and confirm that you won’t be interrupted for the next ten minutes since this is an important task to complete.
- Pour the lye solution into the pan of oils when both the lye solution and the oils have reached about 100°F (38°C). In order to minimize air bubbles in your finished bars, pour the lye solution against a spoon held in oils.
- Once you are done with the last, combine the oil and lye solution until it reaches a trace. If you’re a beginner, I don’t advise using a stick blender for this recipe. It can quickly trace (thicken/emulsify), at least not at first. Use a stainless steel or silicone spatula to stir slowly instead. Feel free to dip your stick blender into the pot and give it a few pulses if the soap does not trace as quickly and you are still stirring after a few minutes.
- When the consistency resembles the thickness of warm pudding, the soap will be a trace. If you drizzle batter on top of it, it won’t have a perfectly flat surface but rather a light texture.
- The Coconut Oil Soap is Molded
Using a silicone mold with cavities is advisable as users pour the soap into it. This is because coconut oil soap hardens quickly and may be challenging to cut into bars if you wait too long.
Place the soap out of direct sunlight on a kitchen counter or another location resembling this that is out of the way of children and pets. Before popping it out and curing it, let the soap remain inside for 48 hours.
How to Cut and Cure Soap
Leave the coconut soap bars for at least ten weeks in an airy area and out of direct sunlight. The skin may be overcleaned if you use the soap before the allotted time. Coconut oil soap becomes mild enough to use as any other body soap after ten weeks. Here is more information on curing.
The soap will be hard and white after the curing period. Your soap can be stored for up to two years after it is made. But be sure to check the coconut oil’s best-by date because that will also be the best-by date for your soap.
There are only three ingredients total in this cold-process soap recipe: coconut oil, lye, and distilled water. All done! The outcome is very hard, white bars with an excellent lather that won’t dry your skin. Now. Users can make coconut oil soap without an immersion blender because the recipe traces quickly. The ingredients can be traced with just stirring. Now the Homemade Coconut soap is ready to be used.
If you are searching for a popular brand that can serve you some of the most sought-after coconut soaps, then it’s the perfect time to turn to Organic Fiji. Their wide range of highly effective coconut products helps you look brighter daily. Visit their website and explore exciting details about the brand today!